1. Nylon zipper No. 5
1. Nylon zipper No. 5
It is high to draw the head mouth: 2.9-3.0 The mouth is wide: 6.5-6.6 It is wide to make up: 6.45+0.05 forms are wide: Thickness 4.15+0.05: 2.70+0.05
Open end ordinarily:
Inch select tooth want, put at any time changing according to different yard definitely ' Because the tooth distance changes) ,Guarantee right insert left to be high right low, left insert on the contrary, ultra sound half miaow pigeonhole get root, position of rubberized fabric take flat and neat, guarantee socket needle hole of square wash, finally, punch cloth foot long about 9.5mm, guarantee socket square put into the root, socket wash needle penetrate in the office, square bring shin one side to want, insert firm, wash needle penetrate of the office.
Maintain, roll over put mould, will certainly should pay attention to lower mould sloping, right insert left to be high right low, left insert, on the contrary, want, carry on strong test, can produce after being qualified.
Apt to present the factor of the substandard product: Because of open cloth to be foot too short too long, cause intensity to be enough separately, socket square can not install roots, unless it cause by the heads square the aslant, unless the easy to be match, last values standard intensity, wash hole lean towards last shin at the time of reason very much, wash the hole and take an advanced study and take the shin to rupture very much.
Mould plastics and open end:
Fix inch, ultra sound is the same, opening needs to change and open the mould, (note: While changing the mould, pay attention to the initial position, because the mould journey is different, otherwise apt to damage the mould) ,Adjust, can put mould into with one paper specifically, hand dish lead ship, the paper is just cut, punch foot long 9.5mm, pigeonhole square socket please turn on tail press according to 3 # nylon
It is high to draw the head mouth: 2.9-3.0 The mouth is wide: 6.5-6.6 It is wide to make up: 6.45+0.05 forms are wide: Thickness 4.15+0.05: 2.70+0.05
Open end ordinarily:
Inch select tooth want, put at any time changing according to different yard definitely ' Because the tooth distance changes) ,Guarantee right insert left to be high right low, left insert on the contrary, ultra sound half miaow pigeonhole get root, position of rubberized fabric take flat and neat, guarantee socket needle hole of square wash, finally, punch cloth foot long about 9.5mm, guarantee socket square put into the root, socket wash needle penetrate in the office, square bring shin one side to want, insert firm, wash needle penetrate of the office.
Maintain, roll over put mould, will certainly should pay attention to lower mould sloping, right insert left to be high right low, left insert, on the contrary, want, carry on strong test, can produce after being qualified.
Apt to present the factor of the substandard product: Because of open cloth to be foot too short too long, cause intensity to be enough separately, socket square can not install roots, unless it cause by the heads square the aslant, unless the easy to be match, last values standard intensity, wash hole lean towards last shin at the time of reason very much, wash the hole and take an advanced study and take the shin to rupture very much.
Mould plastics and open end:
Fix inch, ultra sound is the same, opening needs to change and open the mould, (note: While changing the mould, pay attention to the initial position, because the mould journey is different, otherwise apt to damage the mould) ,Adjust, can put mould into with one paper specifically, hand dish lead ship, the paper is just cut, punch foot long 9.5mm, pigeonhole square socket please turn on tail press according to 3 # nylon
posted by sanny in: |